Archives February 2018

3D Printing – 2 Tone Star Wars Logo

It’s pretty amazing what you can do with a 3D printer. Just the other day I printed a couple of these Star Wars logos with black PLA then paused and switched to what little yellow PLA I had left.

The first “Star” half turned out all black. I forgot to check back on it to change the color. Darn, I could have prevented this by finding the layer and adding a pause command in the Gcode. If I were to do that I would want to move the nozzle off of the print so you don’t ruin it. Then when you change the filament and purge in the next color it should move back. This gives me an idea for a web app to help automate just that! Back to that idea later. Check out my print on Thingiverse.com.

Here is a link to the original 3D print where you can download and print this for yourself.

I recommend getting more into 3D printing. There is a learning curve but you learn a lot!
Check out some of my other Star Wars 3D Prints.

Thanks for stopping by,
Joe

It's only fair to share...Share on facebook
Facebook
Share on google
Google
Share on twitter
Twitter
Share on linkedin
Linkedin

3D Printing Star Wars Characters

Lately with the new Star Wars trailer coming out I thought it would be a great idea to 3D print some Star Wars items. I started with a couple Yoda heads and tried to print them as large as possible while saving plastic. I printed one with only 3 layers thick and no bottom or infill layers. Then the larger with 4 layers thick on the vertical walls setting in Slic3r. Much better but not perfect. It’s hard to print in mid-air in some spots.

I plan to put LEDs in side them with an Arduino and a mic module to make them light up to music. I can even add a seven channel equalizer to add to the quality of the light effects.

It's only fair to share...Share on facebook
Facebook
Share on google
Google
Share on twitter
Twitter
Share on linkedin
Linkedin